 |
| |
| |
 |
|
|
|
|
| |
Optical/Contact
Hand Tachometers | High
Speed Optical Laser Hand Tachometer (CT6/LSR/ERP)
|
Optical Laser Hand Tachometer (CT6/LSR/OP/SW)
| CT
Concorde Hand Tachometer Accessories
Applications
This product has been evolved to facilitate the
measurement of very high speed small shaft
machines, such as dental drilling equipment,
gyros, air motors and similar low torque high
speed devices.
Key Features
Bright red LED Display •Manual/Autorange
modes • Remote sensor input • Last
reading
hold & re-call • Contact Adaptor fitment
• On
target & low battery indicators.
Function - High speed mode
This product operates without reflective tape
under controlled conditions, when using the
LN1 adaptor. There is an integral sensitivity
control which requires adjustment to suit the
specific application conditions.
Accessories
Remote optical sensors, mounting brackets,
Spares for Contact adaptor, Reflective tape.
Laser
Optical System
Normal speed applications
| Optical
Range |
50 - 2000mm |
| Optical
angle |
+/-
80 deg. |
High Speed Mode
With LN1 Lens adaptor fitted Optical Range - nominally
50mm Target - a non reflective paint
or material is required
Certificate
of calibration.
| General Specification |
| Basic RPM range |
3 to 99,999 rpm |
| High speed mode |
500,000 rpm +/-10 |
| Resolution |
max - 0.001 (auto)
+/- 10 rpm HS mode |
| Sensitivity |
Adjustable externally |
| Memory |
1 minute hold |
| On target ind. |
Yes |
| Power |
4 x AAA batteries supplied |
| Other Measurement
ranges |
| Count mode |
0 - 99999 revolutions |
| Resolution |
0.1 metre or 1 rpm |
| Time accu |
0.01 - 99999 secs |
| Time int. |
0.01 - 99999 secs |
| Accuracy |
0.05% rpm/time |
| Order
Codes |
Description |
| CT6/LSR/ERP |
High
speed laser Tachometer |
Return
to Concorde Range
|
supplied with own carrycase
Optional Extras:-
 |
|
|
Remote Optical
Sensor |
|
Heavy duty
Contact Adaptors |
Safety of use
The Laser is classified CLASS II safe for
portable use, the user must take care not to
stare directly into the Laser Beam, this would
have a similar dazzling effect as staring
directly into a high power torch light or car
headlight at close range!
TTL 5v pulse output facility
- For datalogging
and triggering purposes in vibration and
balancing applications.
Additional on/off switch -
To allow continuous
measurement where required for data
monitoring applications in hands free mode.
Sensitivity control - Necessary
for setting the
Laser on specific high speed applications when
using the LN1 lens. |
Optical/Contact
Hand Tachometers | High
Speed Optical Laser Hand Tachometer (CT6/LSR/ERP)
|
Optical Laser Hand Tachometer (CT6/LSR/OP/SW)
| CT
Concorde Hand Tachometer Accessories
|
|
 |
|
|
|
