 |
| |
| |
 |
|
|
|
|
| |
Optical/Contact
Hand Tachometers | High
Speed Optical Laser Hand Tachometer (CT6/LSR/ERP)
|
Optical Laser Hand Tachometer (CT6/LSR/OP/SW)
| CT
Concorde Hand Tachometer Accessories
This
Laser light source Optical Tachometer has
the same general specification and features of
our well established CT6 models, with
enhanced optical performance but using a
Laser light source to replace the visible light
mini-lamp in the standard models.
Laser light gives a greater operating distance
(2 metres) from the reflective target used in
the application.
Wide optical angle of operation
Now angles of up to +/- 80 degrees to
the
surface of the reflective target are practicable
through use of a Laser beam.
Laser beam visibility
The Laser beam produces a small red spot of
intense light which can be readily seen in
virtually any ambient light condition.
Accessories
Remote optical sensors, mounting brackets,
Spares for Contact adaptor, Reflective tape.
Safety of use
The Laser is classified CLASS II safe for
portable use, the user must take care not to
stare directly into the Laser Beam, this would
have a similar dazzling effect as staring
directly into a high power torch light or car
headlight at close range!
Certificate of calibration.
| General Specification |
| RPM overall range |
3 to 99,999 rpm |
| Count mode |
0 - 99999 revolutions |
| Time accu |
0.01 - 99999 secs |
| Accuracy |
0.05% rpm/time |
| On target ind. |
Yes |
| Low battery |
Yes |
| Power |
4 x AAA batteries |
| Carrycase |
supplied |
| Power |
4 x AAA batteries |
Contact Measurement
mode with
LSAB-2 Adaptor attached |
| rpm |
3 - 50,000 rpm |
| Metres/min |
0.30 - 1999.9 |
| Feet/min |
0.30 - 4500.0 |
| Length |
0 - 999.9 metres
(resolutions 0.1 metres) |
| Total revs |
0 - 9999 revolutions |
| Order
Codes |
Description |
| CT6/LSR/OP/SW |
High
speed laser Tachometer |
Return
to Concorde Range
|
supplied with own carrycase
Additional
features
This model has two main additions to the
normal specification:-
TTL 5v pulse output facility -
For
datalogging and triggering purposes in
vibration and balancing applications.
Additional on/off switch - To
allow continuous
measurement where required for data
monitoring applications in hands free mode.
|
Optical/Contact
Hand Tachometers | High
Speed Optical Laser Hand Tachometer (CT6/LSR/ERP)
|
Optical Laser Hand Tachometer (CT6/LSR/OP/SW)
| CT
Concorde Hand Tachometer Accessories
|
|
 |
|
|
|
