Complies
with the requirements of AS3894.1-
2002 and Nace Standards: TM0186-94;
TM0384-94; RP0490-2001; RP0274-98 &
RP0188-99
Applications
Used for detection of coating porosity (pinholes,
or holidays) in dielectric (insulation
type) coatings on conductive substrates,
including concrete. Regulated ‘Pulsed’
output
fully adjustable
Ideal for use:
• In moist conditions
• On wet coating surfaces
• On contaminated coating surfaces
• On carbon-impregnated coatings,
ie: carbonated rubber
• On ‘plastic’/fibreglass type
coatings likely to
become electrostatically charged
• Coating Thickness Range: 150 to 25,000µm
using P40 model
Features
• Lightweight with ABS case
• LED display of voltage
• Voltage ranges from 500v to 20kV or 40kV,
fully adjustable
• Clip-on battery pack
• Constant test current
• Overcharge protection
• Earphones for noisy environments
Complete with Industrial Kit:
Detector with clip-on power pack, 10hr
Charger, Probe Handle with 2m lead, 60mm
Connector for flat brushes, 7m Earth lead with
clamp, Fan Brush, 250mm Flat brass wire
brush, 450mm Probe extension, Air-operated
earphones, Shoulder & Waist Harness, Kit
Case, Operating instructions with conformance
certificate.
| Order
Codes |
Description |
| PM/P20 |
Pulse Porosity Detector |
| PM/P40 |
Pulse Porosity Detector |
Back
to Porosity Meters
|
Pipeline
Kit:
Detector with clip-on power pack, Spare clip-on
battery pack, 10hr Charger, Probe handle with
2m lead, 7m Earth lead with clamp, Fan brush,
Coil joiner with 450mm connector, Airoperated.
| General Specifications |
| |
P20 |
P40 |
| Unit Weight |
2.2kg |
2.2kg |
| Packed Weight |
6.0kg |
6.0kg |
| Display |
LED |
LED |
| Voltage |
to 20kv |
to 40kw |
| Resolution |
100v |
100v |
| Alarm range |
1 to 20kV |
1 to 40kV |
| Short
circuit test current: |
1.5mA max |
| Power
supply |
Gel Cell 3Ah Clip On |
| Dimensions |
260 x 160
x 70mm |
| Alarm |
Audible |
| Probe handle |
Rubber lead |
| Battery condition |
LED Indicator |
|
